|
Publications: |
|
More than one hundred research papers have been published so far. A list of publications is given below. I have also edited two books viz. Biomaterials in Orthopaedics, and Nondestructive Evaluation. A book entitled Nondestructive Testing has been published(2007). Also, a large number of Technical Reports have been published on various areas of engineering and technology. Eddy-current for the determination of lay-up order in cross-plied cfrp laminates, Composites (U.K.), Vol.7, No.2, 1976, pp 88-92.
Fibre volume
fraction measurement by eddy-current technique, Proceedings of the 21
st Congress of ISTAM,
Ultrasonic determination of lay up order in cross-plied cfrp, Composites (U.K.) , Vol.8, No.2, 1977, pp. 100-102.
Fatigue
behaviour of carbon fibre reinforced plastics, Proceedings of the Sixth
Canadian Congress on Applied Mechanics (CANCAM) 77 ,
Domestic refuse
as a source of energy, Proceedings of the Second Conference on
Mechanical Engineering,
Fatigue
behaviour prediction for carbon fibre reinforced plastics, Proceedings of the
International Conference on Fracture Mechanics in Engineering
Applications,
A fractographic study of fatigue in carbon fibre reinforced plastics, Composites (U.K.), Vol.10, No.3, 1979, pp. 174 178.
Non-destructive testing of composites, Composites (U.K.), Vol. 11, No.4, 1980, pp.217-224.
Nondestructive
testing and fatigue behaviour of carbon fibre reinforced plastics, Journal
of The Institution of Engineers (
Significance of defects on fatigue behaviour on cfrp, Fibre Science and Technology (U.K.), Vol.14, No.3, 1981, pp. 171-181.
Fibre volume fraction measurement by X-ray diffractometer, Composites (U.K.), Vol. 12, No.3, 1981, pp. 193-194. General principles of acoustic emission testing and its uses, Proceedings of the Technical Session of the 61 st AGM of U.P. State Centre of The Institution of Engineers (India), Lucknow , 1982, pp.62-66.
Tribological
properties of modern composite materials, Proc. of V Mechanical
Engineering Conference ,
Non-destructive
evaluation of burst pressure of GRP Cylinders, Proceedings of the
Technical Session of the 62 nd AGM of
Ultrasonic study
of materials undergoing tensile load. Proceedings of the
Nondestructive Evaluation Symposium ,
Nondestructive
evaluation of adhesive bonded lap joints using acousto-ultrasonic technique, Proceedings
of the Nondestructive Evaluation Symposium,
Eddy-current
response from various electrically conducting materials, Proceedings
of the Nondestructive Evaluation Symposium,
Defect evaluation in GRP by X-radiography
using high-density fillers, Proceedings of the Nondestructive
Evaluation Symposium,
Manufacturing anomalies in fibre reinforced composites and their non-destructive evaluation, Proceedings of the Technical Session of the 63 rd AGM of U.P. State Centre of The Institution of Engineers (India), Allahabad, 1984, pp. 1-6.
Fibre volume fraction measurement in glass fibre reinforced plastics using X-rays and photomultiplier, Quality Evaluation, Vol.4, No.1, 1984, pp. 5-7.
NDE of hybrid
glass/carbon fibre composites using acoustic and ultrasonic techniques; Proceedings
of National Conference on NDE ,
Fracture of the
fibre reinforced plastic composites and their nondestructive prediction; Fatigue
and Fracture Research in India , Published by International
Congress on Fracture (ICF-6),
Strength of adhesive bonded joints, Advances in Fracture Research, Ed. S.R. Valluri et al, Vol. 4, pp, 2649-2655, Pergamon Press, Oxford (U.K.) , 1984.
Effect of stress
on ultrasonic attenuation, Proceedings of the 3 rd World Instrumentation
Symposium (WISITEX 84),
Study of crack growth resistance by ultrasonic technique, Journal of Pure and Applied Ultrasonic, Vol.6, 1984, pp. 75-77.
Non-destructive evaluation of fibre composites, CISO Communications , 1984, Vol.11, No.3-4, pp. 92-110.
Acoustic emission monitoring of ammonia storage tanks, Proceedings of the Technical Session of 64 th AGM of U.P. State Centre of The Institution of Engineers (India), Lucknow, 1985, pp.23-28.
Use of hybrid
composites as biomaterials, Proc. of XI All
Fibre volume
fraction measurement in GRP, Proc. of World Instrumentation
Symposium, (WISITEX-86) ,
Biomedical Engineering, Proc. of Technical Session of 65 th AGM of the Institution of Engineers (India), U.P. State Centre, Lucknow , 1986, pp. 60-65.
Ultrasonic detection of cumulative damage in hybrid glass fibre zirconia/ epoxy composites, Key Engineering Materials, Vol. 13-15, 1987, pp. 905-908.
Non-destructive evaluation of fibre content in carbon fibre composites using monoenergetic X-rays, Quality Evaluation, Vol.7, No.1, 1987, pp. 63-66.
Study of fatigue life of glass fibre-zirconia hybrid composites using an ultrasonic technique, International Journal of Fatigue (U.K.) , Vol. 9, No.2, 1987, pp. 109-113.
Evaluation of cumulative damage in glass fibre reinforced plastic by ultrasonic method, Bulletin of Materials Science, Vol.9, No.1, 1987, pp. 61-65.
Fatigue life prediction of glass fibre reinforced plastic using acousto-ultrasonic technique, International Journal of Fatigue (U.K.), Vol. 9, No.3, 1987, pp. 175-178.
Evaluation of corrosive environmental degradation of GRP composites using acousto-ultrasonic technique, Proceedings of Sixth International Conf. on Composite Materials ( ICCM ) and Second European Conference on Composite Materials ( ECCM), London (U.K.), Edited by F.L. Mathews, N.C.R. Buskell, J.M. Hodgkinson and J. Morton, Vol.4, Elsevier Applied Science Publishers, London, U.K., 1987, pp. 375-383.
Acousto-ultrasonic evaluation of the strength of composite material adhesive joints, Acousto-Ultrasonics: Theory and Applications, Ed. John C. Duke Jr., Plenum Press, New York ( U.S.A.), 1987, pp. 345-350.
Ultrasonic evaluation of corrosive environmental degradation of GRP composites, Proceedings of the Second International Conference on Testing, Evaluation and Quality Control of Composites ( TEQC ), Guilford, ( U.K. ), 1987, Published in book form entitled Composites Evaluation Ed. J.Harriot, Buterworths Publishers, U.K., 1987, pp. 201-203.
Fibre composite
bone implants, Journal of the Institution of Engineers (
Acousto-ultrasonic technique for predicting fatigue behaviour of glass-fibre reinforced plastics, Journal of the Institution of Engineers (India), Vol. 68, Pt. ME 1 and 2; 1987, pp.10-11.
Behaviour of adhesive joints in corrosive environment; Experimental Mechanics (U.S.A.) , Vol.27, No.4, 1987, pp. 346-351.
Prediction of
material property parameter of FRP composites using ultrasonic and
acousto-ultrasonic techniques; Composite Structure; (
Improvement in fracture properties of short fibre reinforced plastic; Chemsearch and Industry, Vol.11, No.8, 1988, pp.26-28.
Carbon fibre
reinforced epoxy implants for bridging large osteoperiosteal gaps; Biomaterials
(
Acousto-ultrasonic
evaluation of unidirectional fibre reinforced plastic composite materials;
Proceedings of the International Conference on Advanced Experimental
Mechanics , 1988,
Propagation of a small disturbance in aorta: a mathematical model, Il Nuovo Cimento , Vol. 10 D, No. 6, 1988, pp 615-626.
Tensile and
fracture properties of epoxy-flyash composite; Proc. of Seminar cum
Workshop on Advances in Ceramics , 1988,
Fracture behaviour of fly- ash filled FRP composites; Composites Structures (U.K.), Vol. 10, 1989, pp. 182-184.
On the behaviour
of a small disturbance in an arterial blood flow, Proceedings of the First
National Conference on Biomechanics (NCB'88),
Torsional moment to failure for carbon fibre expandable rivets as compared with stainless steel screws for carbon fibre reinforced epoxy fracture fixation plates, Biomaterials (U.K.) , Vol. 10, 1989. pp. 118-122.
Biomedical
Engineering and its social implications; Proceedings of Technical
Session of the 69 th AGM of
Social rehabilitation of hip fracture patients, Indian Journal of Disability and Rehabilitation, Vol.3, No.2, 1989, pp. 61-68.
Detecting the
impact damage in composites using acousto-ultrasonic technique; Proceedings
of the 34 th ISTAM Congress ,
The use of nondestructive testing techniques for the assessment of bone condition; Trends in Biomaterials & Artificial Organs, Vol. 5, No.1, 1990, pp. 45-49.
Electronics and Society; Proceedings of the Technical Session of the 70th AGM of the U.P. State Centre of The Institution of Engineers (India), Lucknow, 1990, pp. 57-61.
Use of carbon implant in bridging large osteoperiosteal gap - an experimental study; Biomaterials in Orthopaedics , Ed. R. Prakash, Biomedical Engineering Research Foundation, Varanasi, 1990, pp. 41-48.
The assessment of bone condition using acousto ultrasonic technique; Biomaterials in Orthopaedics , Ed. R. Prakash, Biomedical Engineering Research Foundation, Varanasi, 1990, pp. 87-92.
Acoustic
emission response from CFRE bone plates, Biomaterials in
Orthopaedics, Ed. R. Prakash, Biomedical Engineering Research
Foundation,
Engineering
aspects of various orthopaedic biomaterials, Proceedings of Sixth
International Conference on
Eddy-current
Testing; An invited chapter in the book Nondestructive
Testing of Fibre Reinforced Plastic Composites, Vol. 2, Ed. J. Summerscales, Published
by Elsevier Applied Science Publishers,
Expert system
for decision support in clinical medicine; Journal of the Institution
of Engineers (
Quality control and damage assessment of composite materials using acousto ultrasonic technique, Standards India, Vol.5, 1991, pp. 162-163.
Ceramic coated conventional implant materials as biomaterials, Trends in Biomaterials and Artificial Organs, Vol.7, No.1, 1992, pp.12-17.
Metallurgical observation on orthopaedic metallic surgical implant which was implanted in-vivo, Trends in Biomaterials and Artificial Organs, Vol.7, No.1, 1992, pp.18-20.
The assessment
of bone condition by acoustic emission and acousto-ultrasonic techniques, Proceedings
of the 13 th Southern Biomedical Engineering Conference , Washington
D.C., 1994, pp. 693-695. Published in book form entitled Biomedical
Engineering: Recent Developments Ed. J. Vossoughi, U.D.C.,
Quality
assessment of glass fibre composites by acousto-ultrasonic technique,
Proceedings of the 14 th World Conference on Non-destructive Testing,
On the Design of SCRAMBOT: An Omnidirectional Vehicle, Proceedings of International Conference on Trends in Industrial Measurement & Automation (TIMA'99 ), Chennai, January 1999, Ed. S. Renganathan, Allied Publishing Ltd., Chennai, pp 58-65.
On the Configuration Design and Kinematics of SCRAMBOT: An Omnidirectional Vehicle, Trends in Mechanical Engineering Education & Research, Ed. S. K. Gupta, K. S. Sishodia & G.S. Sekhon, Proceedings of 11 th ISME Conference, New Delhi, February 1999, Published by ISME, New Delhi, 1999, pp 164-172.
Reengineering Education: Applying Business Process Reengineering for Educational Restructuring; Proceedings of the Fourth Maharashtra Goa State ISTE Convention & National Conference on Towards Excellence in Technical Education in 21 st Century Pusad , November, 1999, pp 18-23.
Use of
Ultrasonics to estimate Soil Bearing Capacity, Proceedings of the International
Conference and Exhibition on Ultrasonics, ICEU-99,
Correlation between strength parameters and ultrasonic velocity of soils, Proceedings of the National Seminar , NDT Voyager 2000 , Vadodara, December 1999, pp 203-209.
Reengineering Education: Applying Business Process Reengineering for Educational Restructuring, Industrial Engineering Journal, Vol. 24, No. 7, July 2000, pp 8-13.
Soil Bearing Capacity determination using ultrasonics, Journal of Pure and Applied Ultrasonics , Vol. 22, No. 3, July-September, 2000, pp 70-77.
Experimental and Finite Element Analysis of fracture criterion of extra deep drawn steel sheets, Proceedings of the 12 th ISME Conference, Chennai , January 2001 , pp 316-321. Published as a book entitled Challenges in Product and Process Design and Development in Information Era, Edited by K. P. Mohammed et al, January 2001.
Non-linear
dynamic analysis of rotor supported ball bearings, Proceedings of
National Seminar on Current Applications of Computers in Design Engineering,
Karthikeyan,
S., Prakash, R. and Paul, B. B., Dual nature hidden layers neural
networks: A novel paradigm of neural network architecture, Proceedings
of the 23 rd Annual EMBS (IEEE) International Conference,
Analysis of film
cooling for the gas turbine blades, Proceedings of 3 rd National
Conference on Thermal Engineering (TNCTS-2001),
Pore fluid
effect on shear strength of Pilani soil, Journal of The Institution
of Engineers (
Analysis of angular contact ball bearing using object oriented programming, Proc. Of 46 th Congress of ISTAM , Hamirpur, December 2001, pp 201 209.
Interrelation between ultrasonic pulse velocity, density and bearing capacity of Pilani soil, Proc. Of 11 th National Symposium on Ultrasonics, Organised by the Ultrasonic Society of India, held at Anantapur, January 2002
Chaotic vibrations in high speed rolling element bearings, Proc. of International Conference on Industrial Tribology (ICIT-2001), Jamshedpur, April 2002, pp 9-57 to 9-64.
The element free Galerkin method in three dimensional steady state heat conduction, International Journal of Computational Engineering Science, Vol. 3, No. 3, May 2002, pp 291-303.
The solution of one-dimensional heat transfer problems using meshless element free Galerkin method, Proc. Of 47 th Congress of ISTAM, Guwahati, December 2002, pp 81 89.
Nonlinear dynamic responses of rolling element bearings due to surface waviness under radial load, Proc. Of 2 nd International Conference on Vibration Engineering and Technology of Machinery (VETOMAC-2), Mumbai, December 2002, pp 1-14.
Experimental and finite element analysis of fracture criterion in general yielding fracture mechanics, Sadhana, Vol. 27, No. 6, December 2002, pp 631-642.
Nonlinear dynamic behaviors of a complex rotor bearing system due to surface imperfections, Proc. of the International Symposium on Process Systems Engineering and Control (ISPSEC'03), Mumbai, January 2003, pp 241-246.
Experimental analysis of fracture criterion in general yielding fracture mechanics, Journal of The Institution of Engineers (India), Vol. 84 (ME), April 2003, pp 18 21.
The effect of speed of balanced rotor on nonlinear vibrations associated with ball bearings, International Journal of Mechanical Sciences, Vol. 45, April 2003, pp 725-740.
Effects of preload and number of balls on nonlinear dynamic behavior of ball bearing systems, International Journal of Nonlinear Sciences and Numerical Simulation, Vol. 3, April 2003, pp 265-278.
Quasi-periodic, subharmonic and chaotic motions of a rotor bearing system, International Journal of Nonlinear Sciences and Numerical Simulation, Vol. 4, June 2003, pp 361-372.
Heat transfer analysis of two dimensional fins using meshless element free Galerkin method, Numerical Heat Transfer, Part A, Vol. 44, July 2003, pp 73-84.
Nonlinear dynamic behaviors of high speed rotor supported by rolling element bearings, International Journal of Applied Mechanics and Engineering, Vol. 8 , October 2003, pp 705-720.
Numerical
comparison of meshless solutions in heat transfer problems, Proc. of
48 th Congress of the Indian Society of Theoretical and Applied Mechanics
(ISTAM), BIT, Mesra,
Verification of
J-CTOD relation in general yielding fracture mechanics (Part-I), Proc.
of 48 th Congress of the Indian Society of Theoretical and Applied Mechanics
(ISTAM), BIT, Mesra,
Physical Significance of fracture criterion in plane stress, plane stress-plane strain and plane strain zone, Proc. of 48 th Congress of the Indian Society of Theoretical and Applied Mechanics (ISTAM), BIT, Mesra, Ranchi, December 18-21, 2003, pp 72- 81.
Verification of J-CTOD relation in general yielding fracture mechanics, Proc. of 13 th National Conference of Indian Society of Mechanical Engineers, IIT, Roorkee, December 30-31, 2003, Paper Number: MD-051.
The numerical solution of three dimensional transient heat conduction problems using element free Galerkin method, Heat and Technology , Vol. 21, No. 2, December 2003, pp 73-80.
Meshless EFG Method in transient heat conduction problems, Heat and Technology , Vol. 21, No. 2, December 2003, pp 99-105.
Application of Meshless EFG Method in Heat Transfer Problems, Proc. of the XVII National and VI ISHMT/ASME Heat and Mass Transfer Conference, IGCAR, Kalpakkam, January 5-7, 2004, pp 314-319
Non-linear dynamic behaviors of rolling element bearings due to surface waviness, Journal of Sound and Vibration, Vol. 272, No. 2, April 2004 , pp 557-580.
The effect of specimen thickness on the experimental and finite element characterization of CTOD in extra deep drawn steel sheets, Sadhana, Vol. 29, Part 4, August 2004, pp 343-347.
Nonlinear dynamic response of a rotor bearing system due to surface waviness, Nonlinear Dynamics, Vol. 37, September 2004, pp 91-114.
Nonlinear
dynamic analysis of an unbalanced rotor supported by rolling element bearing,
Proc . of International
Conference on Vibration Engineering and Technology of Machinery (VETOMAC-3),
Stability analysis of an unbalanced rotor
supported by rolling element bearing, Proc. of International
Conference on Industrial Tribology, Mumbai, December 2004, pp
307-311. (Published as a book entitled Tribology for Equipment Reliability
Edited by S. K. Swaminathan, Allied Publishers Pvt. Ltd.,
Application of meshless element free Galerkin method in two-dimensional heat conduction problems, Computer Assisted Mechanics and Engineering Sciences, Vol. 11, 2004, pp 265-274.
Fibre Composites in Biomedical
Applications, International Conference on Recent Advances in
Composite Materials, Meshless Solution of Axisymmetric Non Linear Heat Transfer Problems Using Meshless Method , Proceedings of ICCES '05 , December 2005, pp 492-499
Material Selection and Design Considerations for Artificial Total Hip Replacement, Medical and Life Sciences Engineering Vol.15 2006, pp. 1-12
Meshless analysis of unsteady-state heat transfer in semi-infinite solid with temperature-dependent thermal conductivity, International Journal of Heat and Mass Transfer , Vol. 33, 2006, pp 231-239.
Material selection and design considerations for artificial total hip replacement, Journal of Medical & Life Sciences Engineering , Vol. 15, 2006, pp 1-12.
Numerical solution of temperature-dependent thermal conductivity problems using a meshless method,Numerical Heat Transfer, Vol 50,2006, pp 125-145
The numerical solution of two-dimensional potential flow problem using meshless EFG method, International Journal of Computational Fluid Dynamics, Vol 20, 2006, pp 1-17
The numerical solution of axisymmetric heat
transfer problems using meshless method, Journal Institution of
Engineers(
Numerical analysis of fluid squeezed between two parallel plates by meshless method, Computer and Fluids, Vol 36, 2007, pp 1460-1480 Effect of thickness on fracture criterion in general yielding fracture mechanics, International Journal of Fracture, Vol 151, 2008, pp 187-198 |